--- title: "SPC Flooring Plank Replacement | Flooring & Panels" canonical: "https://flooringandpanels.com/insights/spc-flooring-plank-replacement/" description: "Can you replace one SPC flooring plank? Check your click system, approved repair method and matching spare stock before you order your collection." language: "en" --- Flooring # Can You Replace a Single Plank in Your SPC Flooring? A chipped plank in the middle of a shop puts your click system and spare stock to the test. Check the repair method before you approve your SPC collection. 3 min read11 November 2026[By Flooring & Panels](https://flooringandpanels.com/our-expertise/)Updated 12 November 2026 In this article A delivery chips one plank in the middle of your shop floor. The nearest wall sits behind a fixed display, and moving the display would take part of the shop out of use. Before you approve your SPC flooring range, find out how an installer could replace that plank and where you would get a matching spare. ## Check how you can reach the damaged plank **Open the floor from an edge.** If your system allows disassembly, the installer releases boards from a suitable perimeter and works back to the damage. Ask which edge can be opened on your layout and what would have to be moved to reach it. **Replace the plank in place.** Some manufacturers document a local repair in which the damaged board is removed and a spare is fitted into the opening. Protex describes both approaches for its click flooring. Quick-Step’s Alpha Vinyl Pad instructions expressly permit local bonding at the plank joints for a replacement on that system. Ask for the written procedure that covers your exact flooring construction and click profile. [Protex replacement guide, 19 July 2022](https://www.protexflooring.com/instructions-on-how-to-replace-the-spc-flooring-lvt-click-flooring-id43032757/), [Quick-Step Alpha Vinyl Pad installation instructions, November 2025](https://int.quick-step.com/-/media/imported%20assets/flooring/6/1/8/qsinstallationlvtalphavinylpadenpdf222262.ashx?filename=Installation+instructions+Quick-Step+Vinyl+-+LVT+AlphaVinylPad.pdf&rev=3bb147245951498391505aa4604610fe&type=original). ## Trial the repair on your sample floor Build a small test area using your proposed boards and the installation specified for them. Ask the installer to replace a plank fully surrounded by other boards. Mark the perimeter access that would be available in a typical room or shop, then record how much of the test area needs to be opened and which tools or materials the approved method requires. After the repair, check both long edges and both ends for visible gaps, raised edges and damage to the neighbouring boards. Look at the replacement beside the surrounding planks under the same light. Ask the manufacturer to confirm in writing which warranty terms apply when the documented repair is followed. ## Set aside a spare that fits your floor Keep labelled spares from the same production lot for important installations. Record the SKU, decor, lot, plank dimensions, finish and click profile or revision so your service team can match the carton to the job. If you order replacement stock from a later run, have a sample fitted alongside retained boards before treating the new run as compatible. Check the fit at both the long edge and the short end, then compare the colour and sheen in the installed space. Agree who will hold the spares and what happens when a decor or profile is discontinued. Add the approved repair method and spare stock to your next range brief alongside the construction, format and finish. [Explore SPC flooring](https://flooringandpanels.com/spc-flooring/), [Build your specification brief](https://flooringandpanels.com/specification-guide/). Your next collection ## Choosing a click system and planning spare stock for your SPC collection? [Build your SPC flooring brief](https://flooringandpanels.com/specification-guide/)