Skins and centre
Review the balance of the outer layers, the core, overall thickness and flatness. A lightweight description needs supporting physical data.
Core / ABA lightweight construction For the trade
Reinforced hybrid wall panels.
Rigid outer skins with a lighter foamed centre. Our reinforced hybrid wall-panel direction balances a large decorative surface with a more manageable panel construction.
Product knowledge01 / Understand
Three layers, with different jobs.
An ABA reinforced hybrid panel uses two more rigid outer layers around a lighter foamed centre. The layers are engineered together: the skins provide support around the core rather than leaving the foamed material to perform alone.
This construction is also described as ABA foamed SPC or Light SPC wall panel. It should not be confused with dense single-layer SPC or with a hollow PVC extrusion. Commercial names alone are insufficient to identify the material.
Our documented reference programme is a nominal 950 × 2400 × 6 mm panel with a stated density of 0.85 ± 0.10 g/cm³. Those figures belong to that construction; other thicknesses and surfaces need their own product documentation.
Surface as part of the assembly
Matt-coated and PET-faced options have different surface specifications. Approve the actual decor, face and joint together.
The buying decision02 / Specify
Specify the whole product.
A useful quotation starts with the construction and the intended market. These are the decisions we work through with your product team.
Prepare your specification ↗| Decision | What to define |
|---|---|
| Reference build | ABA foamed SPC, nominal 950 × 2400 × 6 mm. |
| Reference density | 0.85 ± 0.10 g/cm³, as stated in the July 2026 technical sheet. |
| Connections | Programme-specific tongue-and-groove or alternative agreed profile. |
| Finishing system | Inside corner, outside corner and end trims; adhesive and sealing details. |
| Validation | Use the construction-specific technical sheet and installation instructions. |
Questions from product teams
A clearer
specification.
Does reinforced hybrid mean there is glass-fibre reinforcement?
Not from that name alone. The supplied reference construction is an ABA layered panel. Any additional reinforcement must be explicitly confirmed in the technical specification.
Can we use its reference test data for every panel in our collection?
No. Test scope depends on the substrate, thickness, surface and construction. Match the documentation to the supplied product.
Continue exploring
Connect the details.
Surface reference01Technical reference / 6 mm ABA programme
Light SPC wall-panel technical data
A construction-specific reference for our nominal 950 × 2400 × 6 mm reinforced hybrid wall-panel programme.
Explore the rangeSurface reference02Connection / T&G systems
Tongue-and-groove wall panels
Define the joint as carefully as the panel face.
Explore the range03Application / Wet-area systems
Shower wall panels
A shower-panel programme needs more than a water-resistant board.
Explore the rangeFrom product knowledge to a commercial range