Specific construction
Use the sheet for the documented thickness, core and surface scope. Obtain matched evidence for alternatives.
Technical reference / 6 mm ABA programme For the trade
Light SPC wall-panel technical data.
A construction-specific reference for our nominal 950 × 2400 × 6 mm reinforced hybrid wall-panel programme. Figures below come from the supplied technical data sheet dated 13 July 2026.
Product knowledge01 / Understand
Test results need a defined product.
The reference product is an ABA foamed SPC panel intended for interior wall cladding in wet and dry areas. The outer layers and lighter centre form one engineered assembly. This page does not assign these results to every wall-panel product in the library.
The sheet reports water absorption and thickness swelling averages of no more than 0.7%, under their respective test methods. Joint water tightness is recorded separately as a pass after 24 hours under the specified manufacturer’s protocol.
Matt and PET surfaces have different micro-scratch classifications in the sheet. The stated fire classification is D-s3, d2 under EN 13501-1. Review the relevant construction, installation conditions and documentation against the requirements of the destination market.
Tested result, careful interpretation
A laboratory result is not an unlimited service promise. Installation details, exposure and the tested assembly remain relevant.
The buying decision02 / Specify
The documented reference.
A useful quotation starts with the construction and the intended market. These are the decisions we work through with your product team.
Prepare your specification ↗| Characteristic / method | Stated reference result |
|---|---|
| Nominal dimensions | 950 × 2400 × 6 mm; thickness tolerance ±0.3 mm. |
| Density / ISO 1183-1 | 0.85 ± 0.10 g/cm³. |
| Flexural properties / ISO 178 | Stress ≥12 MPa; modulus ≥1500 MPa. |
| Water absorption / ISO 62 | Average ≤0.7% in the stated test. |
| Thickness swelling / ISO 24336 | Average ≤0.7% in the stated test. |
| Joint water tightness | Pass: 24-hour manufacturer protocol, verified by the named testing laboratory in the source sheet. |
| Dimensional stability / ISO 23999 | Average length shrinkage ≤0.15%; stated exposure 60°C for 6 hours. |
| Reaction to fire / EN 13501-1 | D-s3, d2. |
| Fungi / ISO 846 | Grade 0 in the stated laboratory exposure. |
| Micro-scratch / EN 16094 | Matt: class ≤MSR-B2; PET: class ≤MSR-B5. |
| Colour fastness / EN ISO 105-B02 | Grade 6. |
| PET peel resistance / ISO 24345 | Average ≥170 N/50 mm; PET face only. |
Reference values are taken from the supplied July 2026 technical sheet. They apply to its documented construction and surface scope. Product-specific reports and scope are reviewed for each programme.
Questions from product teams
A clearer
specification.
Does D-s3, d2 mean the panel is fireproof?
No. It is a reaction-to-fire classification with smoke and droplet sub-classifications. It is not a claim of non-combustibility or suitability for every building application.
Are these values certified for every decor and thickness?
No blanket coverage is claimed. Match the technical documents and any underlying reports to the exact construction, surface and programme being supplied.
Continue exploring
Connect the details.
Surface reference01Core / ABA lightweight construction
Reinforced hybrid wall panels
Rigid outer skins with a lighter foamed centre.
Explore the range
Surface reference02Connection / T&G systems
Tongue-and-groove wall panels
Define the joint as carefully as the panel face.
Explore the range03Application / Wet-area systems
Shower wall panels
A shower-panel programme needs more than a water-resistant board.
Explore the rangeFrom product knowledge to a commercial range